Table of Contents
Advertisement
Install Instructions – 4064M
Step 7 – Attach Top Wing
• Along the roof of the van will be a cross support near the slot end of the top panel.
• Along the cross support, near the slots there will be squares cut into the cross support.
• Push plastic nut clip (9) into these squares.
• Press top wing firmly against cross support.
• Screw through the top wing into the nut clips using #12 pan head screw (10).
• Repeat for a total of 4x.
Square and align partition to your liking.
Tighten all bolts from previous steps.
Your installation is now complete.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 8
Advertisement
Table of Contents
