Step 5 Install Partition; Step 6 Install Top Wing - Kargo Master 4064M Installation Manual

Step 5 – Install Partition
• Place partition back into van.
• Set on top of 1/4" carriage bolts (3)
protruding through the floor mount brackets
(D&E)
• Align and bolt both sides of partition with
previously installed wings using 1/4"-20 x
.625" flanged HH (12) and a 1/4"-20 flanged
nyloc nut (7). Similar to Step 1.
• Repeat for all slots on both wings for a total
of 8x.
• Bolt the bottom of the
parititon to the carriage bolts
using 1/4"-20 flanged nyloc
nuts (7). Repeat for a total of
4x.
• Snug Tighten, but allow
movement.
Step 6 – Install Top Wing
• Install top wing onto the top of the partition.
• The panel will extend towards the rear of the van.
• Bolt top wing (A) to partition using 1/4"-20 x .625" flanged HH (12) and 1/4"-20 flanged nyloc
nuts (7). Repeat for a total of 6x.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Install Instructions – 4064M
Page 7