Table of Contents
Advertisement
Troubleshooting
1. The power LED is off.
•
Check that all the devices are on.
•
Check that all the cables are the correct specification and connected properly.
2. The display connected to the SCL-1 shows no picture.
•
Check that all the devices are on.
•
Check that all the cables are the correct specification and connected properly.
•
Check that the display works properly, and that the source device has a normal output signal.
•
Make sure that the display device supports HDCP.
•
Check that no compatibility issues exist between the device and the display. If so, replace the display with a
compatible model.
3: The display connected to the SCL-1 displays snow or a mosaic pattern.
•
Check that all the cables are the correct specification and connected properly.
•
Check that the source input device has no problems, such as snow, mosaic or a damaged disc. If so, replace it with a normal
input source.
•
Check that no compatibility issues exist between the SCL-1 and the display. If so, replace the display with other models.
Instruction Manual - 4K/60 Scaler
Troubleshooting
14
Advertisement
Table of Contents
