Marcy ME-1019R Owner's Manual page 9

STEP 3
1. Connect the upper extension sensor wire (#10) to the lower sensor wire (#12).
2. Connect the front extension hand pulse wire (#60) to the middle extension hand pulse wire (#63).
3. Connect the tension control cable (#7) to the extension tension cable (#11).
4. Attach front post (#4) to the main frame (#1). Secure using four curved washers (#9) and four Allen
bolts # (8).
Tip: Avoid pinching the Extension Wires and hand pulse wires
7
60
8
© Impex Inc.
4
10
63
11
12
9
8
9
1
8
www.marcypro.com