Quickserver Description; Supplied Equipment - SMC Sierra Monitor FS-QS-1010 Quickserver Start-Up Manual

1

QUICKSERVER DESCRIPTION

QuickServer is a high performance, cost effective Building and Industrial Automation multi-protocol
gateway providing protocol translation between serial, Ethernet, and LonWorks
NOTE: For troubleshooting assistance refer to
appendices in the related driver supplements. Check the
technical support resources and documentation that may be of assistance.
The QuickServer is cloud ready and connects with Sierra Monitor's SMC Cloud. See Section
further information.
2

SUPPLIED EQUIPMENT

QuickServer Gateway
•
Preloaded with two selected drivers (on the FS-QS-1X11 and FS-QS-12X1 one of those drivers is
LonWorks). A sample configuration file is also pre-loaded onto the QuickServer.
•
All instruction manuals, driver manuals, support utilities are available on the USB drive provided
in the optional accessory kit, or on the
Accessory kit (optional) (Part # FS-8915-36-QS) includes:
•
7-ft CAT5 cable with RJ45 connectors at both ends
•
Power Supply -110/220V (p/n 69196)
•
DIN rail mounting bracket
•
Screwdriver for connecting to terminals
•
USB Flash drive loaded with:
o
QuickServer Start-up Guide
o
FieldServer Configuration Manual
o
All FieldServer Driver Manuals
o
Support Utilities
o
Any additional folders related to special files
configured for a specific QuickServer
o
Additional components as required - see Driver Manual Supplement for details
1
LonWorks is a registered trademark of Echelon Corporation.
Appendix B, or any of the troubleshooting
Sierra Monitor website
Sierra Monitor website.
Page 6 of 60
QuickServer Start-Up Guide
1
devices and networks.
for
6.3.2 for