Load The Updated Configuration File; 7.3.1 Using The Toolbox Application To Load A Configuration F Ile - SMC Sierra Monitor FS-QS-1010 Quickserver Start-Up Manual

7.3

Load the Updated Configuration File

7.3.1 Using the Toolbox Application to Load a Configuration F ile

•
From the Toolbox main page, click on the setup icon (the gear picture).
•
Select File Transfer.
•
Browse and select the .csv file, open, then click "Update Config".
•
Once download is complete, click the Restart Button (or cycle power to the QuickServer) to put
the new file into operation.
NOTE: It is possible to do multiple downloads to the QuickServer before resetting it.
Page 25 of 60
QuickServer Start-Up Guide