Linking Commands; Scpi Command Reference - HP E1361A 4X4 User Manual

Linking Commands

SCPI Command Reference

40 HP E1361A Relay Matrix Command Reference
All manuals and user guides at all-guides.com
Linking IEEE 488.2 Common Commands with SCPI Commands:
Use a semicolon between the commands. For example:
or
*RST;OUTP ON TRIG:SOUR HOLD;*RST
Linking Multiple SCPI Commands:
Use both a semicolon (;) and a colon (:) between the commands.
For example:
ARM:COUN 1;:TRIG:SOUR EXT
This section describes the Standard Commands for Programmable
Instruments (SCPI) commands for the relay matrix. Commands are listed
alphabetically by subsystem and also within each subsystem.
Chapter 5