Bus-Section Panel (Connecting Panel) - Eaton Power Xpert UX 12 User Manual

2.2.2

Bus-section panel (connecting panel)

The bus-section panel is used to separate or connect
parts of the installation (bus-sections).
The bus-section panel in the illustration consists of two
panels; one panel contains the circuit breaker, the other
panel is the bus riser panel. The Power Xpert
designs that allow for the bus-section to be mounted
either on the Left or the Right of the riser panel. An
additional option with Power Xpert
that the bus riser panel can be supplied suitably
equipped with a number of units:
- Circuit Breaker
- Contactor
- Earthing Truck
- Voltage Transformer
- Disconnect/Isolation
Bus sectionaliser + Bus Riser
Bus Riser + Bus sectionaliser
Fig. 2-10 A bus-section and riser; the bay is two panels wide
®
UX has
®
UX Switchgear is
®
Power Xpert UX with W-VACi circuit breaker 6063308 G01 01 14 July 2011 www.eaton.com
Product description
A
C
A. Sectionaliser panel
B. Riser panel right
C. Bus-section circuit breaker
A
A. Riser panel left
B. Sectionaliser panel
C. Bus-section circuit breaker
B
B
C
19