How To Start Up The Edit Menu; Edit File - Barco R9040100 Owner's Manual

Random Access Adjustment Mode
To start up the EDIT menu:
Push the cursor key é or ê to highlight 'Edit'.
1
2 Press ENTER to select.
The Edit file adaptation menu will be displayed.
3 Select the file which must be edited (mostly the active file).
4 Press ENTER.
The file name will be displayed in the upper right corner.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal start in pixels
Horizontal period in µs (is automatically adapted during the installation of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of a file with LOAD)
Active vertical lines
Vertical start in lines
Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD)
All settings can individually be changed.

EDIT FILE

xga.s30
HORIZONTAL
TOTAL 1344 PIXELS
ACTIVE 1024 PIXELS
S T A R T 296 PIXELS
PERIOD 20.678 µS
VERTICAL (FIELD)
TOTAL 806 LINES
ACTIVE 768 LINES
S T A R T 36 LINES
INTERLACED [OFF]
READ AMDS
OPTIONS
é,ê,ç ,è <ENTER>, <EXIT>
Push the cursor key é or ê to select an item.
1
The color of the selected item will change and follow one of the three methods to change the value.
a. method 1:
1 press ENTER to activate the digits
2 enter directly with the numeric keys on the RCU or local keypad the new value or
b. method 2:
1 Press ENTER to activate the digits
Push the cursor key è or ç to select the changing digit.
2
Push the cursor key é or ê to scroll to desired digit.
3
4 When finished press ENTER to confirm.
c. method 3
Counting up or down by pushing the cursor key è or ç .
1
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are
automatically measured and filled in in the menu table. These values will be available when starting up the EDIT procedure of an
active file.
(Caution : Do not adjust these settings on an active file, they are used to identify the input source file.)
7-4
EDIT FILE
Filename Src Resolution
-----------------------------------------------------
Video525.s01 1 675x240i
Video525.c01 1 675x240i
Video525.c02 1 675x240i
-----------------------------------------------------
Active file : Video525.c50
Select with é or ê ,ç
<ENTER> to accept
<EXIT> to return.
menu 2
5976135 BARCOREALITY SIM6 21032000