Common Address - Barco R9040100 Owner's Manual

Push the cursor key é or ê to highlight 'Change Projector Address'' (menu 1).
1
2 Press ENTER to select.
The Change Projector Address menu will be displayed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
DIMMING
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Projector Address
Push the cursor key é or ê to highlight 'Projector Address'' (menu 1).
1
2 Press ENTER to select.
The actual address is filled in.
The first digit is highlighted.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
- with the digit keys on the RCU or the local keypad or
push the cursor key ç or è to select a digit and change the value by pushing the cursor key é or ê until the new value is reached.
-
Continue with the other digits on the same way.

Common Address

Push the cursor key é or ê to highlight the active 'Common Address'' (menu 1).
1
2 Press ENTER to select.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) :
Common address (PPM) : 0
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Only addresses between 0 and 1 are valid.
- with the digit keys on the RCU or the local keypad or
pushing the cursor key é or ê until the new value is reached.
-
5976069 BARCOREALITY SIM6 21032000
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
0
Service Mode
9-5