Aborting The Replicated Nas Failback Job On The Target; Enabling The Vtl Cartridge Based Replication On The Target; Enabling Nas File/Directory Based Replication On The Target; Disabling Vtl Cartridge Based Replication On The Target - Quantum DXi2500-D Manual

Aborting the Replicated
NAS Failback Job on the
Target
Enabling the VTL
Cartridge Based
Replication on the
Target
Enabling NAS File/
Directory Based
Replication on the
Target
Disabling VTL Cartridge
Based Replication on
the Target
Disabling NAS File/
Directory Based
Replication on the
Target
Downloading a
Replication Report
Getting the Status of
Active Cartridge Base or
File/Directory Request
Replication CLI Commands
syscli --abort nasfailbackjob --repname <NAS_share_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the CLI admin to abort a current running replicated
NAS share failback job. The replicated NAS share name, target host name and
the ID can be retrieved from the list NAS Failback jobs.
syscli --enable cartrep --name <VTL_name> [--syncid <sync_id>] [--locked]
This CLI allows the admin user to enable cartridge based replication for the
specified VTL on the target. If the sync ID is not specified, the VTL name is used
as the default sync ID.
syscli --enable filedirrep --name <NAS_share_name> [--syncid <sync_id>]
[--locked]
This CLI command allows the CLI admin to enable file or directory based
replication on the target. If the sync ID is not specified, the share name is used
as the default sync ID.
syscli --disable cartrep --name <VTL_name>
This CLI allows the admin user to disable cartridge based replication for the
specified VTL on the target.
syscli --disable filedirrep --name <NAS_share_name>
This CLI command allows the CLI admin to disable file or directory based
replication for the specified NAS share on the target.
syscli --downloadrpt replication
This CLI command allows the CLI admin to download or copy the generated
replication report to the home directory. The CLI admin can then copy the file to
another host if desired.
syscli –getstatus trigger –source | target
This CLI command allows the CLI user to get the status of active cartridge or file/
directory replication on the specified source or target.
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
83