Media Actions
Delete All Media
VTL Configuration CLI Commands
media = 1
vtl = MyVTL
barcode = SDL101
-
type = SDLT
S4
access = scratch
pool = application
used = 0.0
capacity = 800.0
media = 2
vtl = MyVTL
barcode = SDL101
-
type = SDLT
S4
access = scratch
pool = application
used = 0.0
capacity = 800.0
end
syscli --del media --barcode <barcode> --name <VTL_name>
syscli --export media (--barcode <barcode>) | --all --name <VTL_name>
syscli --recycle media (--barcode <barcode>) | --all --name <VTL_name>
syscli --writeprot media (--barcode <barcode>) | --all --name <VTL_name>
[--disable]
syscli --import media (--barcode <barcode>) | --all --name <VTL_name>
This CLI command allows the CLI admin, given a specified media barcode(s) and
its VTL name, to change the state of a tape to deleted, exported, recycled,
write-protected or import media using this CLI. Multiple barcodes can be
specified on the command that supports it. This is specified in the syntax with
"()" which means one or more. Alternatively, if the --all option is specified, then
all the media in the specified VTL is used for the operation.
To disable the write-protect on a media, the --disable option must be specified
in the --writeprot media command.
syscli --deleteall media --name <VTL_name> [--sure]
This CLI command allows the CLI admin to delete all media in the specified VTL.
If the --sure option is not specified, no confirmation prompt is displayed.
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
17