Replication CLI Commands
Replication CLI Commands
E1015614 Cifs: Failed to write/set option "reactivate".
E1015621 Cifs: Option "deactivate" is missing.
E1015622 Cifs: Option "deactivate" is required because another optional
option is specified!
E1015623 Cifs: Failed to read/get option "deactivate".
E1015624 Cifs: Failed to write/set option "deactivate".
E1015631 CIFS was not previously set up
E1015632 CIFS was not previously deactivated
E1015633 Failed to deactivate CIFS!
E1015634 Failed to reactivate CIFS!
E1015651 Cifs failed!
The following sections describe the supported replication CLI commands:
Note: VTL and cartridge based replication CLI commands are available only on
DXi6700, DXi7500, and DXi8500 systems.
•
Initiating a Cartridge Based, File/Directory Based, or Namespace Replication
•
Locking a VTL or NAS Share
•
Unlocking a VTL or NAS Share
•
Get VTL or NAS Share Lock Status
•
Initiating Source to Target Cartridge or File Synchronization
•
Generating a Replication Report
•
Listing the Allowed Replication Sources for the Target
•
Adding a Source on a Target
•
Deleting a Source on a Target
•
Listing the Replication Targets for the Source
•
Adding a Target on a Source
•
Deleting a Target on the Source
•
Enabling VTL Replication Options on the Source
•
Disabling VTL Replication Options on the Source
•
Enabling NAS Share Replication Options on the Source
•
Disabling NAS Share Replication Options on the Source
•
Abort Replication of VTL or NAS
•
Abort synchronization of VTL or NAS
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
71