Quantum DXi4510 Installation And Configuration Manual page 20

DXi4000 Installation and Configuration Guide
Figure 15 Getting Started
Wizard: Date & Time
20
c Select the Any check box to allow all traffic types (management, replication, and
data) on the interface.
d Click Update to save the changes you made to the IP Address table.
8 Do not make any changes under IP Address Configuration > Routing Details
unless directed by your network administrator.
9 Click Next to continue.
The Date & Time page displays (see
10 If necessary, select Manual Date & Time Settings to manually set the system date
and time.
Specify the New System Date by clicking Calendar. Specify the New System Time
using the drop-down boxes.
Note: You can also choose to synchronize the system time with an NTP time
server. To select a timeserver pool, you must have specified at least one DNS
IP address in step 5d above. Otherwise, you must specify the IP address of
the timeserver pool. For more information, see the Quantum DXi4000
User's Guide (6-67092) located on the documentation CD.
11 In the Timezone drop-down box, select the time zone where the DXi4000 is located.
12 Next to Time Format, select the format to use when displaying times (24 hours or
12 hours).
13 Click Next to continue.
The Confirm page displays (see
Figure 15).
Figure 16).
Initial Configuration