Quantum DXi4510 Installation And Configuration Manual page 17

Initial Configuration
Caution: Configuring network settings requires advanced networking
knowledge. When selecting network settings other than the options
recommended in the following procedures, contact your network
administrator for assistance.
If you choose to configure more than one network interface, refer to
the Quantum DXi4000 User's Guide (6-67092) located on the
documentation CD for details.
Caution: For effective bonded network use, a properly configured network
switch is required. (A network switch is not supplied with the
DXi4000.) The DXi4000 bonding settings must match the switch
settings. If the switch settings and the DXi4000 settings do not match,
your system may become inaccessible through the switch.
Note: The figure below is for illustrative purpose only. The Network page will
reflect the actual number of physical ports in the system.
DXi4000
17