Njoy Balder 1500 User Manual page 16

6.1 Battery kit assemly procedure
Balder 1500
Step 1. Remove adhesive tapes.
Step 3. Put assembled battery
packs on one side of plastic
shells and insert one more defect
battery on the space (without
connecting it).
30
Step 2. Connect all battery
terminals by following below
chart.
Step 4. Cover the other side of
plastic shell as in the below
picture.
Balder 3000
Step 5. Remove adhesive tapes. Step 6. Connect all battery
terminals by following below
chart.
Step 7. Put assembled battery Step 8. Cover the other side of
packs on one side of plastic plastic shell as in the below
shells. picture.
31