Pepperl+Fuchs IUH-F117-V1-EU Manual page 38

IUH-F117-V1-*
Operation
Higher range if the transmission power increases.
Possible overreaches if the transmission power increases.
Adjacent read/write heads might be affected if the range increases.
Channel DRM CD (IUH-F117-V1-EU Only)
This parameter sets the sequence of the channels permitted in the DRM (= dense
reader mode) or reads out the sequence of the permitted channels. Only
channels 4, 7, 10 and 13 are available.
ParamTyp:
Default:
Value range:
Example:
WP1UCD.00.04.07.0A.04.0D defines the sequence 7, 10, 4 and 13 as defined
channels
RP1UCD.00.00 reads out the sequence of permitted channels.
Reset to Default RD
This parameter returns all settings of the IUH-F117-V1-* to its default
configuration.
ParamTyp:
Example:
WP1URD.00.00
Anti-Collision AC
This parameter switches on/off the anti-collision algorithm for handling several
tags within the detection range or reads out whether the algorithm is switched on
or off.
ParamTyp:
Default:
Value range:
Example:
WP1UAC.00.01.01 detects several tags in the detection range and provides a
warning with Status A
WP1UAC.00.01.00 does not provide a warning with Status A
RP1UAC when several tags are in the detection range.00.00 reads out whether
the algorithm is switched on or off
Recommendation: Do not alter the settings of this parameter.
When the anti-collision algorithm is switched off:
Shorter access time.
38
CD
CD = .07.0A.04.0D
.04, .07, .0A, .0D
RD
AC
AC = .01
.00, .01