Pepperl+Fuchs IUH-F117-V1-EU Manual page 33

IUH-F117-V1-*
Operation
Note!
The memory bank MB parameter defines the bank which this command
accesses. See "Memory Bank MB" on page 40.
Enhanced Read Words ER
An attempt is made until <WordNum> 32-bit words are successfully read from the
address <WordAddr>. Only changing data is transferred via the interface. When a
read/write tag leaves the read range, status 5 is output.
Command:
Response:
Note!
The memory bank MB parameter defines the bank which this command
accesses. See "Memory Bank MB" on page 40.
Single Write Words SW
One attempt is made to write <WordNum> 32-bit words from the address
<WordAddr>.
Command:
Response:
Note!
The memory bank MB parameter defines the bank which this command
accesses. See "Memory Bank MB" on page 40.
Enhanced Write Words EW
This command behaves in the same way as the write words command. When a
read/write tag leaves the read range, status 5 is output.
Command:
Response:
Note!
The memory bank MB parameter defines the bank which this command
accesses. See "Memory Bank MB" on page 40.
ER <ChanNo> <WordAddr> <WordNum> <CHCK> <ETX>
<Status> <Data> <CHCK> <ETX>
SW <ChanNo> <WordAddr> <WordNum> <Data> <CHCK> <ETX>
<Status> <CHCK> <ETX>
EW <ChanNo> <WordAddr> <WordNum> <Data> <CHCK> <ETX>
<Status> <CHCK> <ETX>
33