Paramtyp - Pepperl+Fuchs IUH-F117-V1-EU Manual

IUH-F117-V1-*
Operation
Read Param
This command reads configuration parameters from the IQH2-... and IUH-F117-
V1-* read/write head.
Command:
Response:
Syntax
RP
Write Param
This command writes configuration parameters to the IQH2-... and IUH-F117-V1-*
read/write head.
Command:
Response:
Syntax
WP
For additional details on the parameters see chapter 7.3.3.
7.3.3

ParamTyp

Stored Configuration SC
This parameter reads out the entire parameterization of the IUH-F117-V1-*
read/write head.
ParamTyp:
Example:
RP1USC.00.00 reads out the entire parameterization in the following sequence:
Byte position
[0] [1]
[2]
[3] [4]
[5]
[6]–[9]
36
RP <ChanNo> <SystemCode> <ParamTyp> <ParamLength> <CHCK>
<ETX>
<Status> <Data> <CHCK> <ETX>
<SystemCode><ParamTyp> <ParamLength>
WP <ChanNo> <SystemCode> <ParamTyp> <ParamLength> <Data>
<CHCK> <ETX>
<Status> <CHCK> <ETX>
<SystemCode><ParamTyp><ParamLength><Value>
SC
Meaning Value range
Device detection IUH-F117-V1-* = .7D.68
IUH-F117-V1 = .7B.51
Default flag Default = .64
Modified = .6D
PT parameter from 100 mW = .00.64
to 2000 mW = .07.D0
CD parameter Number of set channels = 1–4
Set channels see "Channel DRM CD (IUH-F117-
V1-EU Only)" on page 38