Unique Numbering As Per Iso - Pepperl+Fuchs IUH-F117-V1-EU Manual

R/w head for identcontrol

Hide thumbs Also See for IUH-F117-V1-EU:

Manual (50 pages)

Table Of Contents

Table of Contents

IUH-F117-V1-*

Product Description

GS1/EPCglobal developed the system of Electronic Product Codes (EPC) for use

in resource planning. Transponders with a memory for EPC codes are

programmed by the user. The memories of new transponders do not have to

contain valid EPC codes. The EPC numbers are allocated and managed by GS1.

If you require EPC numbers, please contact the respective GS1 branch in your

country (http://www.gs1.com/contact).

The electronic product code has a defined layout that is structured as follows:

1. Header: the header specifies the EPC standard used and contains the se-

2. Filter value: describes the product unit, e.g., end product, packaging, prod-

3. Partition: describes the point at which the EPC manager mentioned below

4. EPC Manager: allocated series of digits that identify the manufacturer.

5. Object class: series of digits that describe the object, e.g., article number.

6. Serial number: series of digits that identify the article, e.g., consecutive se-

Length

Value

1 = decimal

To work with unique identifications without having to revert to potentially costly

EPC codes, we recommend using the UID and TID of the transponders

programmed permanently into the transponder chips by the semiconductor

manufacturer.

Note!

The TID on some transponder types is not unique. See table "Tag Types UHF 868

MHz" on page 35.

4.1.7