Configuration Commands; Changetag Command - Pepperl+Fuchs IUH-F117-V1-EU Manual

IUH-F117-V1-*
Operation
Note!
16-Bit Read/Write Commands
The read/write commands SR, ER, SW and EW are interpreted as 16-bit versions
by means of a preceding # symbol.
The 16-bit read/write commands behave in the same way as the 32-bit versions.
■
■
Example:
#SW000202ABCD corresponds to SW000101ABCD
7.3

Configuration commands

7.3.1

ChangeTag Command

Change Read/Write tag CT
This command tells the R/W system with which read/write tag to communicate.
Command:
Response:
Default:
Example:
CT172 sets TagType to IUC72
CT180 sets TagType to All, permits the read-only code to be read out from all tag
types and hence draw conclusions about the tag actually in use.
Note!
Tag Type
The CT command automatically sets the parameters that are suitable for the
selected tag.
The following tag types are currently supported:
34
16-bit commands write or read a word with a length of 2 bytes.
32-bit commands write or read a word with a length of 4 bytes.
CT <ChanNo> <TagType> <CHCK> <ETX>
<Status> <CHCK> <ETX>
TagType = IUC80