Orientation In The Room; Minimum And Maximum Distances - Pepperl+Fuchs IUH-F117-V1-EU Manual

IUH-F117-V1-*
Installation
5.3.1

Orientation in the room

The alignment of the antennas on the data carrier in relation to the antenna on the
read/write head influences the sensing range of the system. Therefore, make sure
that the antennas are aligned parallel to one another.
5.3.2

Minimum and Maximum Distances

When positioning the read/write head, please observe the minimum distances.
The lateral distance between the read/write head and metals or liquids should be
at least 50 cm. The distance between the read/write head and the ground should
also be at least 50 cm. The mounting surface material does not affect the
read/write head.
Figure 5.1
22
Maximum sensing range
Minimum sensing range
metal support
liquid