Figure 1-7 Buffer Display Format - Keithley 2601A User Manual

Series 2600A System SourceMeter® Instruments User's Manual
Figure 1-7
Buffer display format
Saving the reading buffer to the USB flash drive
Complete the following steps to save the reading buffer data to a USB flash drive:
1. Insert the USB flash drive into the USB port.
2. Press STORE and use the navigation wheel to select SAVE > USB1.
3. Select one of the following file formats:
•
•
4. Use the navigation wheel to select the desired reading buffer.
5. Use the navigation wheel to change the file name.
6. Push the navigation wheel or the ENTER key to save the file.
7. Push EXIT to return to the main menu.
2600AS-900-01 Rev. B / September 2008
CSV
XML
Return to Section Topics
Section 1: Front and Rear Panel Operation
1-17