Increment/Decrement Digit Mode; Password - Magnetrol Thermatel TA2 Installation And Operating Manual

16

3.5.2.5 Increment/Decrement Digit Mode

The Increment/Decrement digit entry mode is used with
some screens for changing numeric values.
Push button
Increases the displayed value. If held down the digits scroll
until the push button is released. Depending upon what
Up
screen is being revised, the increment amount may change by
a factor of 10 after the value has been increased 10 times.
Decreases the displayed value. If held down the digits scroll
until the push button is released. Depending upon what
Down
screen is being revised, the decrement amount may change
by a factor of 10 after the value has been decreased 10 times
Return to the previous menu without changing the original
Back
value which is immediately redisplayed.
Enter Accepts the displayed value and returns to the previous menu.

3.5.3 Password

A password protection system restricts access to portions of
the user interface menu which affect the unit's operation
and configuration. The default user password is 0.
If desired, a new user password can be entered in the
Advanced Configuration in the New Password screen.
The password can be changed to any numerical value up
to 255.
Per revised password policy, user authority is no longer
granted from the Fieldbus interface if the user password
has been set to a non-zero value. It will be necessary to
enter the user password to access user parameters from the
Host system.
Keystroke Action
54-650 Thermatel ® Model TA2 Transmitter - F fieldbus ™
OUNDATION