Character Data Entry Mode; Increment/Decrement Digit Mode - Magnetrol Thermatel TA2 Installation And Operating Manual

54-631 THERMATEL Model TA2 Transmitter

2.5.2.4 Character Data Entry Mode

This mode is most commonly used when entering a new
local tag line into the TA2. The local tag as shipped from
the factory is "MAGNETROL TA2" and can be changed
to permits the user to identify the instrument with a the
actual tag line of the instrument or the service. When this
mode is entered, a cursor marks the leftmost character on
the 2nd line.
Push button
Moves to the next character (Z, Y, X, W, ...). If held down
Up
the characters scroll until the push button is released.
Moves to the previous character (A, B, C, D, ...). If held down
Down
the characters scroll until the push button is released.
Moves the cursor to the left. If the cursor is located at the
Back leftmost position the screen is exited without changing the
original characters.
Moves the cursor to the right. If the cursor is located at the
Enter rightmost position the new value is saved and the display
returns to the previous menu.

2.5.2.5 Increment/Decrement Digit Mode

The Increment/Decrement digit entry mode is used with
some screens for changing numeric values.
Push button
Increases the displayed value. If held down the digits scroll
until the push button is released. Depending upon what
Up
screen is being revised, the increment amount may change by
a factor of 10 after the value has been increased 10 times.
Decreases the displayed value. If held down the digits scroll
until the push button is released. Depending upon what
Down
screen is being revised, the decrement amount may change
by a factor of 10 after the value has been decreased 10 times
Return to the previous menu without changing the original
Back
value which is immediately redisplayed.
Enter Accepts the displayed value and returns to the previous menu.
Keystroke Action
Keystroke Action
15