Magnetrol Tuffy 039-6000-100 Installation And Operating Manual

Magnetrol Tuffy 039-6000-100 Installation And Operating Manual

Liquid level controls with pneumatic switch

Advertisement

Quick Links

Installation and Operating Manual
Tuffy
®
Liquid Level Controls
with Pneumatic Switch
Side
Mounted
loat Level
Switch

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tuffy 039-6000-100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Magnetrol Tuffy 039-6000-100

  • Page 1 Tuffy ® Liquid Level Controls with Pneumatic Switch Installation and Operating Manual Side Mounted loat Level Switch...
  • Page 2 Cautions Magnetrol will repair or replace the control at no cost to the Cautions alert the technician to special conditions that purchaser (or owner) other than transportation.
  • Page 3: Installation

    Report any concealed damage to the carrier within 24 hours. Check the contents of the packing slip and report any discrepancies to Magnetrol. Check the nameplate model number to be sure it agrees with the packing slip and pur- chase order.
  • Page 4 Mounting The pneumatic Tuffy Liquid Level Switch is available with a 2" NPT mounting bushing, a variety of flange mountings and external cages for mounting outside of the vessel. 1.3.1 Mounting an NPT Tuffy 1. Apply either Teflon tape or Petrolatum to the mounting ®...
  • Page 5: Reference Information

    Airline Connections 1. Inlet air should be filtered with a 5 micron or finer filter. This will extend the life of the valve mechanism. 2. Connect the inlet air line to the ⁄ " NPT connection for either air inlet A or air inlet B, depending on the valve 2-Way 2-Way 3-Way...
  • Page 6: Preventive Maintenance

    Preventive Maintenance Periodic inspections are a necessary means to keep your Magnetrol level control in good working order. This control is a safety device to protect the valuable equipment it serves. A systematic program of preventive maintenance should be implemented when the control is placed into service. Based on utilizing a preventative maintenance program and observing the following section on “what to avoid”, your...
  • Page 7: Specifications

    Specifications 2.5.1 Mechanical Specifications Pressure: 0.6 SG 1500 psig at +300° F (103 bar at +149° C) 0.4 SG 500 psig at +300° F (34 bar at +149° C) Process Temperature: -40° F to +300° F (-40° C to +149° C) Ambient Temperature: Max.
  • Page 8 5300 Belmont Road • Downers Grove, Illinois 60515-4499 • 630-969-4000 • Fax 630-969-9489 • www.magnetrol.com 145 Jardin Drive, Units 1 & 2 • Concord, Ontario Canada L4K 1X7 • 905-738-9600 • Fax 905-738-1306 Heikensstraat 6 •...

Table of Contents