Forward-Facing Installation With Vehicle Belts - Maxi-Cosi Moda User Manual

Installation

Forward-facing installation with vehicle belts

NOTE: Before you start installation, adjust the
shoulder straps and headrest to fit your child.
Refer to page 24/25.
1. Adjust the child restraint to the forward facing
position and select desired seat angle by adjusting the
base to ('LOW', 'MID' or 'HIGH').
2. Place restraint on back seat of vehicle in line with a
top tether strap anchorage point.
3. Thread the vehicle seat belt through the back of the
seat though the YELLOW forward-facing belt path.
4. Place one hand on seat and firmly press the child
restraint down into the vehicle seat and pull on
seatbelt to remove slack.
5. Attach the top tether strap to the anchorage point.
Adjust until all the slack is removed. Ensure Base of
seat is not lifted.
NOTE: If the car seatbelt is not long enough to
secure the child restraint, DO NOT USE SEAT BELT
EXTENDERS.
NOTE: These images are for reference and illustration purposes only. We recommend
the use of the provided stabilising bar cover and the seat mat when installing
this product (if fitted).
NOTE: There is an option to install seat using seat belt with accessory locking clip.
Please see instructions provided with locking clip for installation.
PUSH
PUSH
I
Moda Convertible Car Seat
SELECT:
'LOW'
'MID'
'HIGH'
CLICK
I I
29
Maxi-Cosi