Installation; Rearward-Facing Installation With Vehicle Belts - Maxi-Cosi Moda User Manual

Installation

Rearward-facing installation with vehicle belts

1. Start by loosening full length of the top tether.
2. Set base in position 3 (High).
3. Swing stabilising arm into position.
4. Place restraint facing rearwards on back seat of
vehicle in line with a top tether strap anchorage point.
5. Thread the vehicle seat belt through the BLUE belt
path at the bottom of the restraint and fasten buckle.
6. Press the child restraint firmly down into the vehicle
seat and remove belt slack.
7. Attach the top tether strap to the anchorage point.
Adjust until all the slack is removed. Ensure Base of
seat is not lifted.
NOTE: These images are for reference and illustration purposes only. We recommend
the use of the provided stabilising bar cover and the seat mat when installing
this product (if fitted).
NOTE: There is an option to install seat using seat belt with accessory locking clip.
Please see instructions provided with locking clip for installation.
• DO NOT LEAVE CHILDREN UNATTENDED IN THE VEHICLE.
I I
28
Moda Convertible Car Seat
CLICK
WARNING
I
Maxi-Cosi
PUSH
SWING UP
PUSH
HIGH