Angle Configuration For The Seat - Maxi-Cosi Moda User Manual

Check Before Installation

Angle configuration for the seat

Front of vehicle
DO NOT install convertible child restraints excessively reclined,
•
ensure the angle is no greater than 40°.
DO NOT adjust harness or tether strap hardware such that it sits
•
too close to the occupant.
Ensure that correct seatbelt path is used and that the restraint is
•
installed in the correct direction for rearward facing application.
Refer to page 28.
DO NOT wrap baby in a blanket or swaddled as infant can be
•
ejected and killed in an accident.
Ensure the harness fits the baby firmly.
•
Ensure that any blanket or other covering may only be placed over
•
the harness after the harness is adjusted firmly.
The infant's legs are not be bound or wrapped together and the
•
arms are not bound or wrapped together.
Position seat ensuring that the angle is no
greater than 40˚ from horizontal plane.
Angular adjustment is achieved by adjusting the
base. Refer to page 25 for base adjustment.
40˚
WARNINGS
I I
Moda Convertible Car Seat
I
19
Maxi-Cosi