Installation
Forward-facing using ISOGO
1. Select the desired seat angle
Push the red button, located on the front of the
base, inwards to select the desired seat angle:
'LOW', 'MID' or 'HIGH'.
Place the car seat in the vehicle, facing forward.
2. Attaching ISOGO lower connectors
Release belt to full length by pressing grey button
and pulling adjuster. Repeat for both sides.
Locate low anchorage points. You can find this by
looking for the ISOFIX logo located on the vehicle
seat.
Attach the lower connector on both sides. Listen
for a "click!"
NOTE: These images are for reference and illustration purposes only. We recommend
the use of the provided stabilising bar cover and the seat mat when installing
this product (if fitted).
NOTE: You can move the car seat out of the way to locate and attach the connectors,
then place back into position before tightening.
I
I
32
Moda
Convertible Car Seat
I
Maxi-Cosi
(12 months to 4 years approximately)
PUSH
CLICK!
BOTH SIDES
SELECT:
'LOW'
'MID'
'HIGH'
PUSH
& PULL