Care And Maintenance; Cleaning The Buckle - Maxi-Cosi Moda User Manual

Care and maintenance

Cleaning the buckle

push metal rod
into slot
6. Allow buckle to dry.
7. Refit crotch buckle ensuring RED button is facing out.
8. Thread the webbings as shown with arrows.
9. Put the 2 metal rods back into the webbing loops and push into the slots.
10. Pull the buckle to make sure that it is fitted properly.
11. If the buckle does not return to original working order, contact Dorel Australia Customer
Service on 1300 809 526.
Follow the manufacturer's instructions at all times. Before
removal, ensure you have carefully noted the way which
the various parts are attached to the seat so as to facilitate
reassembly.
Your child car seat is equipped with a buckle designed to
give your child maximum protection during proper use. When
working properly, your buckle should always fasten with an
audible 'CLICK'.
If sticky liquids (such as baby food, fruit juice, etc.) get into the
buckle it may become sluggish and you will not hear a 'CLICK'.
The buckle should be cleaned by following the steps below.
1. Fold seat cover and foam back from buckle. Using a flat
edged screwdriver gently lift one end of rod out releasing
crotch buckle, repeat for other side.
2. As illustrated, place the buckle unit under running water
(40 degrees Celsius). Let the water flow through the
mouth of the buckle for one minute.
3. Simultaneously, latch and unlatch the tongues into the
buckle several times until a strong audible click is heard.
4. If you still cannot hear a strong audible click after latching
the buckle several times. Repeat steps 2 and 3.
5. DO NOT oil any part of the buckle.
I
Moda Convertible Car Seat
I I
35
Maxi-Cosi