Leica Lino ML90 User Manual page 16

Automatic alignment (continuous mode)
In continuous alignment mode the Leica XCR Catch
will automatically align the Leica Lino ML180 laser and
will then monitor and readjust the alignment contin-
uously.
XCR Catch
± 4°
± 1.4m @ 20m
± 4.5ft @ 65ft
1
2
XCR Catch
3
Leica Lino ML series 785880c en
1 Repeat steps 1-3 from section "Automatic align-
ment (single mode)" on page 14.
2 Press auto alignment key 2 and sensitivity key 1
together for 2 sec. Horizontal laserline will be
shut off during automatic alignment.
3 Predefine a scan direction by pressing the direc-
Auto
tion keys 3 accordingly within the first 3 sec.

If no direction is predefined the unit will
start looking for the receiver in a predefined
sequence (middle - left - right).

To deactivate the auto alignment process
press the alignment key 2 again for 2 sec.
4 The auto alignment process will move the laser
unit until it is precisely aligned with the Leica XCR
Catch receiver.
5 When the receiver detects the exact position it
will beep for 2 sec. and will display the lighted
green LED 4 and the middle position.
6 The Leica XCR Catch makes the laser follow the
4
movements of the Leica XCR Catch and will
continuously keep monitoring and readjusting the
alignment after the middle position has been
found. To stop this continuous process press the
alignment key 2 or the On/Off button.

The receiver will automatically deactivate
the auto alignment in case no laser signal is found
or in case the signal is permanently lost after
more than 45 sec. The receiver will display all 5
3
LEDs blinking and will sound 3 short beeps. To
reinitiate the receiver press any key.
15
Working with receivers
DE
EN
FR
IT
ES
PT
NL
DA
SV
NO
FI
JA
ZH
KO
PL
HR
HU
RU
CZ
EL
LT
LV
EE
SL
SK
TR
BG
RO