Leica Lino ML90 User Manual page 13

DE
EN
Pairing the Leica XCR Catch with the Leica
ML180 Laser
FR
The Leica XCR Catch remote/receiver works exclu-
IT
sively with the Leica Lino ML180 line laser. The
ES
receiver that is included in the package is already
PT
paired with the laser and only communicates with this
specific laser. If you want to pair another Leica XCR
NL
Catch with your laser you will need to redo the pairing
DA
procedure as described below.

SV
When setting up the Leica Lino ML180 for
NO
radio pairing make sure that no other Leica XCR Catch
FI
is in operation in the area to avoid accidental pairing
with this remote.
JA
Pairing procedure:
ZH
1 Turn laser OFF 1.
KO
2 Press and hold both buttons Horizontal MODE 2
PL
and Vertical MODE 3.
HR
Turn laser ON 1.
3
HU
4 Laser is in pairing mode (LED 4 5 6 blinking
slowly in sequence).
RU
5 Turn Receiver ON 7.
CZ
6 Press button Auto alignment 8 of receiver.
EL
7 Pairing process is complete (LED 4 5 6 blinking
LT
rapidly in sequence for 20 sec).
LV
EE
SL
SK
TR
BG
Working with receivers
RO
Lino ML180:
6
5
Lino
ML180
3
2
ON
LASER
1
4

If the laser is in pairing mode and does not
receive the signal from the remote, it will turn off
after 30 seconds.

The pairing procedure can be repeated
anytime. A Leica Lino ML180 laser and the paired
Leica XCR Catch remote will stay paired until they are
actively paired with another device.
Leica Lino ML series 785880c en
12
XCR Catch:
7
8
XCR Catch