Leica Lino ML90 User Manual page 15

DE
EN
Automatic alignment (single mode)
In single alignment mode the Leica XCR Catch will
FR
automatically align the Leica Lino ML180 laser once
IT
and will then deactivate the alignment feature.
ES
PT
NL
XCR Catch
DA
SV
1x ± 4°
NO
± 1.4m @ 20m
FI ± 4.5ft @ 65ft
JA
ZH
KO
PL
1
HR
HU
RU
2
CZ
EL
LT
LV
EE
SL
3
SK
TR
BG
Working with receivers
RO
XCR Catch
1 Set up the laser unit at the initial position.
2 Pre-align the laser (V line) within ± 4° of the desired
final alignment position.
3 Select the sensitivity 1 to be used during alignment.
Adjustment features for beeper and sensitivity are
Auto
deactivated during the automatic alignment
process.
4 Press auto alignment key 2 for 2 sec. until 2 red
LEDs blink. Horizontal laserline will be shut off
during automatic alignment.
5 Predefine a scan direction by pressing the direction
keys 3 accordingly within the first 3 sec.

If no direction is predefined the unit will
start looking for the receiver in a predefined
sequence (middle - left - right).

To deactivate the auto alignment process
press the alignment key 2 or press the On/Off
button.
4
6 The auto alignment process will move the laser unit
until it is precisely aligned with the Leica XCR Catch
receiver.
7 When the receiver detects the exact position it will
sound a beep for 2 sec. and will display the lighted
green LED 4 and the middle position. The auto
alignment process will be terminated when middle
position has been found.

The receiver will deactivate the auto align-
ment if no laser signal is found or the signal is perma-
3
nently lost within a time frame of 45 sec. The receiver
will display all 5 LEDs blinking and will sound 3 short
beeps. To reinitiate the receiver press any key.
14
Leica Lino ML series 785880c en