Table of Contents
Advertisement
During the open window, the light flashes and the locks beeps, every second. To open the lock, a valid
code has to be entered again during the open window. After entering a right code, a double signal
sounds. You can unlock the door. If the lock is not opened within 3 seconds, the lock will automatically
lock again.
If the open window expires without entering a valid code, the lock is secured again with time delay.
If the lock is set to dual combo, one valid code starts time delay. During the open window, two valid
codes have to be entered, to open the lock.
Press a random key to break off time delay.
6
CHANGING CODE (WITH THE DOOR OPEN!)
0
Press and hold '0' until a double signal sounds. The LED will illuminate when performing the following
actions:
For example!
1
1
1
1
• Enter the old code
2
2
2
2
• Select your new personal code. Enter the new code
2
2
2
2
• Enter the new code again
If an incorrect code is entered on the second occasion, a long signal sounds and the old code remains
valid.
www.m-locks.com
1
1
2
2
2
2
Multi Level Software Locks
V03
EN
7
Hide quick links:
Advertisement
Table of Contents
