Scrapping And Disposing Of The Machine - Delfin Bisky 400 Instruction Manual

7.6

Scrapping and disposing of the machine

ATTENTION
Once the machine has reached the end of its technical life, the machine must be
dismantled and scrapped in order for it not to be used any more in any way.
It must however be made possible to use or recycle the material used to construct it.
NOTE
Procedure
DANGER
Switch off the machine
1.
2. Remove both the electrical and pneumatic supply to the machine:
a. Electrical supply; Remove the wires that supply electricity by removing the wires
on the main terminal paying attention that the wires are no longer live.
Dismantle the following parts :
3.
a. Electrical and electronic parts
b. Non metal parts and components
DANGER
4. In case the machine is moved , make reference to the procedure described in the
relevant section of this manual.
page 90
The materials used for building the machine are non-biodegradable.
Dispose of its components through a specialised centre.
The Manufacturer does not assume any responsibility for accidents or injury
to persons or property due to the use of single parts of the machine in other
circumstances or on machines that the parts are not intended for when
originally designed.
The scrapping and dismantling of the machine must be carried out by
authorised personnel specialised and trained for this specific work.
Electrical and electronic parts are to be thrown away according to the local
laws and regulations.
Maintenance
Bisky
07_Manutenzione_en.fm