Machine Description - Delfin Bisky 400 Instruction Manual

1.11

Machine description

Foreseen uses
Foreseen operation:
The machine is intended for the production of biscuits/cookies of different shapes and sizes.
Dough used on the machine:
Semi-hard and soft dough used for the production of biscuits.
Working place
The machine was designed and constructed for use in an indoor ambient, repaired from
atmospheric agents.
Power supply nature foreseen
The machine is powered by external electrical supply that converts into mechanical
movement, necessary for the machine functioning.
The machine is not to be used in the following conditions :
All uses not explicitly specified in the list on page 6 are considered unforeseen uses, and in
particular:
• Use of the machine in an area with explosives.
• Use of the machine in a flammable area.
• Washing of the machine zone where the control apparatus are fitted with water jets;
• Use of dough other than those foreseen.
• Handling of material to be extruded with weight higher than that specified in
Envisaged uses on page 6.
Machine composition
In this section the main parts of the machine and theIr functions within the production cycle
are described .
Main parts of the machine
The machine is composed of the following main parts :
a. Stainless steel hopper in which the dough is introduced
b. Control panel with screen in order to program the machine
c. Conveyor belt that transports the tray in which the dough is deposited
d.
Extruding head that contains the extruding rollers and on which the moulds and
nozzles are assembled
Fig. 1.2 Main parts of the machine
pag.8
a
d
General Information
b
c
Bisky
01_info_gen_en.fm