Introduction Of The Rotary, Fixed Or Wire Cut Plates - Delfin Bisky 400 Instruction Manual

Use
6.13

Introduction of the rotary, fixed or wire cut plates

To make the plates receive the motion from the machine and avoid damage during the
processing, they must be correctly inserted into their working seat (1) so as to activate the
safety limit switch (2); when the plate is in place, fix it by fastening the screws (3).
Fig. 6.3 Plate block
1
BEWARE
Bisky
06_Uso_en.fm
it is very important that the stop bolt (1) touches the aluminum plate (dove
tail shape) fixed to the main head.
2
3
page 73