Functioning Methods; Starting Of The Machine - Delfin Bisky 400 Instruction Manual

Fig. 6.1 Working area
6.4

Functioning methods

The Bicky can function in the following ways :
1. In an automatic way, by carrying out the programming on the screen, and all the
safety's active .
2. In a manual way, by completing one working cycle and after the machine has
stopped, the operator must once again push the START button .
6.5

Starting of the machine

Starting procedures :
1. Turn the main door block switch positioned in the back bottom door of the machine
clockwise so that it is in the position 1 (IG).
2. Push the RESET. This button is to be pressed each time the machine is switched on,
and after an emergency has been activated. By pressing this button the siren is
silenced and the machine is prepared for another start
BEWARE
3. Push the START button once you have selected the desired biscuit to be produced .
page 62
If the RESET button is pressed whilst an emergency is still activated the siren
will be silenced but the red emergency warning light will continuo flicking. In
order to reset the machine and prepare it for another start the emergency
button or guard must be closed in normal safety working conditions .
Use
Bisky
06_Uso_en.fm