7.3
Cleaning method
ATTENTION
Parts that need to be
cleaned
Stainless steel
Control panel
Electrical parts
Cleaning frequency
Frequency
Daily
Daily
Weekly
Daily
page 86
Avoid the use of solvents that can damage synthetic materials. Do not use
petrol, naphtha, nitre-perchlorate diluent and trichloroethylene in particular..
Instruments & detergents and method
Use water and detergent, pass over with cloth and dry
immediately after
Clean with a dry and soft cloth
Use a vacuum-cleaner to remove dirt and dust
Parts to clean
Extruding rollers
Extruding mould, rotary nozzle plate or wire cut
mould ext
Control panel
Conveyor belt assembly
Maintenance
Bisky
07_Manutenzione_en.fm