Programmed Maintenance - Delfin Bisky 400 Instruction Manual

Maintenance
7.4

Programmed maintenance

Standard maintenance, are all those operations that are carried out by specialised and
authorised personnel. Periodical inspections, foreseen interventions and maintenance that
are to be carried out under maximum safety conditions.
Operators qualification
The foreseen maintenance operations can be carried out only in maximum safety
conditions and by specialised and authorised personnel, trained, qualified the authorised
personnel that have read and fully understood this manual and this specific section.
Lubrication
The following lubricants are to be used on this machine :
• Grease type lubricants :
– Manual with grease pump
– Manual with brush
Periodical adjustments and check ups
Parts and their names that
need periodical checking
Interlocking devices (micro-
switches)
Emergency stop button
Periodical adjustments and check ups
Bisky
07_Manutenzione_en.fm
Safety con-
trol fre-
quency
Every 40
hours
Every 40
hours
Frequency
Monthly
Monthly
Monthly
Monthly
Monthly
Procedure
Check the efficient functioning
Check the efficient functioning
Parts to lubricate and
grease
Conveyor belt support-
ing rods
Motors
Electrical parts
Body and steel coverings
Air filter
page 87