Safety Devices - Delfin Bisky 400 Instruction Manual

2.6

Safety devices

DEFINITION
Active emergency systems are emergency stops assembled on the machine to prevent or
reduce the danger and injury, and are activated purposely by the operator.
1. The machine was designed with safety guards which render all its moving parts safe
and enable the operator to work under safe conditions. The Manufacturer declines
any responsibility arising from the tampering with these safety devices.
Fig. 2.4 Emergency mushroom-head button located on the control panel.
2. Some special safety systems have been installed on the machine with the purpose of
immediately stopping the machine in case of an emergency condition (
Emergency mushroom-head button located on the control panel.
The moving guards (which can be opened through a handle) have been installed so
3.
that when they are opened the machine stops immediately.
4. The fixed safety guards (which cannot be opened without a tool or removing some
screws) must be removed only after cutting out the electric power supply.
5. Immediately advise your superiors about any deficiency in the safety system and
guards and of any dangerous condition which occurs.
6. Under no circumstance should the safety devices be removed or tampered with.
page 14
Information on the safety features
Fig. 2.4
).
Bisky
02_safety_en.fm