Chapter 6 Use; Dangerous Areas And Residual Risks During The Use; Operators Qualification; Working Area - Delfin Bisky 400 Instruction Manual

Use
Use
Chapter 6
NOTE
6.1

Dangerous areas and residual risks during the use

Dangerous zones and residual risks is described.
6.2

Operators qualification

The machine operation must be carried out exclusively trained operators, qualified and
authorised after having studied and understood the information regarding this machine.
6.3

Working area

Fig. 6.1 Working area
In
underlined.
The Bisky are machines that need to be operated constantly by an operator. Once the
machine has been programmed and the desired number of trays are been filled in the
automatic mode, the operator must remain present to remove the filled trays, which are
discharged on the control panel side or the opposite side, according to the program. On
the Bisky the control position is situated on the control panel side. On this type of machine it
is possible to operate the machine with one or two operators, one operator when the tray
returns to the control panel side, and two if the tray is made to exit on in the opposite
direction.
NOTE
BEWARE
Bisky
06_Uso_en.fm
When reading this chapter make reference to the drawings on the control
panel (Chapter 4 Operator interface).
a page 62 the safe working area where the operator can work are
During the normal functioning of the machine it is forbidden to introduce
strange objects other tan the trays under the extrusion rollers .
Never introduce objects other than trays on the conveyor belt, and never
under no circumstances lean on the conveyor .
page 61