Chapter 7 Maintenance; Hygienic Regulations To Respect During The Machine Cleaning And Washing Of The Machine; Standard Maintenance - Delfin Bisky 400 Instruction Manual

Maintenance
Maintenance
Chapter 7
7.1 Hygienic regulations to respect during the machine
cleaning and washing of the machine.
ATTENTION
7.2

Standard maintenance

Standard maintenance, are all those operations that are carried out every day by the
authorised personnel, such as cleaning of the machine general inspection of the machine
to make sure the machine is in good and safe working order.
Operators qualification
The standard maintenance of the machine can be carried out once the authorized
personnel has studied and understood this part of the manual.
Cleaning
When carrying out cleaning of the machine, make sure the main electrical power supply to
the machine has been switched off, this is done by removing the main plug from the wall
sprocket.
For the efficient functioning of the machine we recommend that the machine is cleaned
daily, in particular:
• The machine must be cleaned after each working shift.
• The cleaning is to maintain the delicate parts in good working order and to easily
visualise parts that are loosened or worn due to the daily wear and tear or due to
abnormal faults.
NOTE
Bisky
07_Manutenzione_en.fm
The operators responsible for the washing and cleaning of the machine must
wear protective and sterile clothing. The washing of the parts are to be
carried out in a room suitable for these kind of operations, and according to
the local hygienic laws and regulations.
We recommend the washing down with water not hotter than 35 ° C and
detergent suitable to wash down fat and according to the EC regulations.
Do not spray water directly onto the control panel, electrical cabinet or
conveyor belt assembly during the washing down of the machine.
page 81