Adjusting The Height Of The Dough Extrusion Table; Height Adjustment - Delfin Bisky 400 Instruction Manual

Adjusting the height of the dough extrusion
Adjusting the height of the dough
Chapter 8
extrusion table
ATTENTION
8.1

Height adjustment

Fig. 8.1 Adjustment handwheel
2
1
Use the handwheel (1) to adjust the height between the extrusion table and the product
outfeed point.
1. Turn the handwheel clockwise or anticlockwise to raise or lower the height
accordingly.
Use the reference indicator (2) to check the height of the table.
NOTE
NOTE
Bisky
08_regolazioni_en.fm
TCarry out all the adjustments inside the machine only after having
disconnected the machine from both electric and pneumatic supply.
Determining the correct height of the extrusion table is fundamental be it for
the wire cut processing -to avoid any displacements of the biscuits on the
tray- or for the nozzle processing -to grant regular shape to the biscuits-.
For cut wire processing, it is recommended to set the table to its top height.
page 93