Dangerous Zones And Residual Risks - Delfin Bisky 400 Instruction Manual

Information on the safety features
Active safety devices
DEFINITION
Active emergency systems are emergency stops assembled on the machine to prevent or
reduce the danger and injury, and are activated purposely by the operator.
Emergency stop button
Emergency stop button is found on the main control panel of the machine, it allows the
operator to stop the machine in case of an emergency.
Safeguarding
• The electrical plant of the machine guarantees the protection against people in case
of an electrical discharge, through indirect contacts, as foreseen by the CEI EN 60204-1
regulations.
• Powerful electrical parts with dangerous high tension in the electrical cabinet code IP
54, in conformity with the CEI EN 60204-1. All the tensions on the control buttons of the
machine are in 24 Volt; Furthermore both circuits have a protection against short circuits
and accidental contact towards the ground.
DANGER
NOTE
2.8

Dangerous zones and residual risks

DEFINITION
Dangerous zone around and in the internal parts of the machine, dangers that can cause
serious injury to people exposed.
During the normal operation of the machine, there are some risks that the operator will be
exposed to, these dangerous areas, are marked with adhesives, and the operator can
eliminate these risks by carefully following the instructions in this manual and by adopting
the safety measures and protections illustrated.
Compulsory to wear gloves.
Compulsory to wear shoes with hard protection top
Bisky
02_safety_en.fm
Tampering with the guards, can cause danger or serious injury to the
operators or other people exposed to the machine.
The Manufacturer is not responsible for injury caused to people, domestic
animals or property, due to negligence, or for disregarding the contents on
the safety features and recommendations in this manual.
page 17