Esc L; Esc S - Bematech LR2000 Programming Manual

Decimal
[Description] When in page mode ESC FF prints all data in the print buffer in one time.The buffer
data is not deleted after being printed.

ESC L

[Name] Select page mode
[Format] ASCII
Hex
Decimal
[Description] Switches from standard mode to page mode.
 This command is enabled only when processed at the beginning of a line in
[Notes]
 This command has no effect in page mode.
 After printing by FF is completed or by using ESC S, the printer returns to standard
 This command sets the position where data is buffered to the position specified by
 This command switches the settings for the following commands (in which the
 Only valve settings is possible for the following commands in page mode; these
 The printer returns to standard mode when power is turned on, the printer is reset,
[Reference] FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \

ESC S

[Name] Select standard mode
[Format] ASCII
Hex
Decimal
[Description] Switches from page mode to standard mode.
 This command is effective only in page mode.
[Notes]
27 12
ESC L
1B 4C
27 76
standard mode.
mode.
ESC T within the printing area defined by ESC W.
values can be set independently in standard mode and page mode) to those for
page mode:

Set right-side character spacing: ESC SP

Select default line spacing: ESC 2, ESC 3
commands are not executed.

Turn 90 degrees clockwise rotation mode on/off: ESC V

Select justification: ESC a

Turn upside-down printing mode on/off: ESC {

Set left margin: GS L

Set printable area width: GS W
or ESC @ is used.
ESC S
1B 53
27 83
LR2000 Programming Manual V1.2