The printer does not transmit ASB status or perform status detection during
processing of this command even when ASB is specified.
When this command is received during macro definition, the printer ends macro
definition, and begins performing this command.
Once an NV bit image is defined, it is not erased by performing ESC @, reset, and
power off.
This command performs only definition of an NV bit image and does not perform
printing. Printing of the NV bit image is performed by the FS p command.
[Reference]
FS p
[Example]
When xL = 64, xH = 0, yL = 96, yH = 0
LR2000 Programming Manual V1.2