Esc So N - Bematech LR200M Programming Manual

5
6
7
n = 3: Error status
Bit
0
1
2
3
4
5
6
7
Bit 6:
n = 4: Continuous paper sensor status
Bit
0
1
2.3
4
5.6
7
[Reference] GS a

ESC SO n

[Name] Select Double Width mode
[Format] ASCII
Hex
Decimal
[Description] Select Double Width mode. To turn double width off, use LF or DC4 command.
Off 00
On 20 32
Off 00
On 40 64
Off 00
Off/On Hex Decimal
Off 00
On 02
-- --
Off 00
On 10 16
Off 00
On 20 32
Off 00
On 40 64
Off 00
Bit 6 is On when printing is stopped due to high print head temperature until the
print head temperature drops sufficiently or when the paper roll cover is opened
during printing.
Off/On Hex Decimal
Off 00
On 02
- -
On 10 16
Off 00
On 60 96
Off 00
ESC SO n
1B 0E n
27 14 n
0 Paper present.
Printing stopped because of paper out.
0 No error.
Error occurred.
0 Not used. Fixed to Off.
Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
-- Undefined.
0 Not used. Fixed to Off.
Not used. Fixed to On.
0 No unrecoverable error.
Unrecoverable error occurred.
0 No auto-recoverable error.
Auto recoverable error occurred.
0 Not used. Fixed to Off.
Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
- Undefined.
Not used. Fixed to On.
0 Paper roll sensor: Paper present.
Paper roll end detected by paper roll sensor.
0 Not used. Fixed to Off.
11
LR200M Programming Manual V1.0