Changes In Configuration Guide Vol. 2 (For Version 2.2) (Ax1240S-S002-40X) - Alaxala AX1250S Series Manual

2. Changes in Configuration Guide Vol. 2 (For Version
2.2) (AX1240S-S002-40X)
4. Send Control
4.1 Overview of the shaper
4.1.3 Scheduling [Addition]
Descriptions have been added to Table 4-4 WFQ configuration range as follows:
Before the change:
Table 4-4 WFQ configuration range
Line speed
1 Gbit/s
100 Mbit/s
10 Mbit/s
Auto Negotiation
#1: 1 M = 1000 K.
#2: For values greater than 1000 K, set them in 100 K increments (1000 K, 1100 K, 1200 K...10000000 K).
#3: For values that are less than 1000 K, set them in 64 K increments (64 K, 128 K, 192 K...960 K).
After the change:
The table below shows the WFQ configuration range. WFQ does not work when the line status is half duplex.
Instead, PQ is used for operation.
Table 4-4 WFQ configuration range
Line speed
1 Gbit/s
100 Mbit/s
10 Mbit/s
Auto Negotiation
#1: 1 M = 1000 K.
Bandwidth
64 Kbit/s-1 Gbit/s
64 Kbit/s-100 Mbit/s
64 Kbit/s-10 Mbit/s
64 Kbit/s-1 Gbit/s
Bandwidth
64 Kbit/s-1 Gbit/s
64 Kbit/s-100 Mbit/s
64 Kbit/s-10 Mbit/s
64 Kbit/s-1 Gbit/s
Configuration range
Mbit/s 1M-1000M
Kbit/s 1000-1000000
64-960
Mbit/s 1M-100M
Kbit/s 1000-100000
64-960
Mbit/s 1M-10M
Kbit/s 1000-10000
64-960
Mbit/s 1M-1,000M
Kbit/s 1000-1000000
64-960
Configuration range
1M-1000M
Mbit/s
Kbit/s
1,000-1000000
64-960
1M-100M
Mbit/s
Kbit/s
1000-100000
64-960
Mbit/s 1M-10M
Kbit/s
1000-10000
64-960
Mbit/s 1M-1000M
Kbit/s
1000-1000000
64-960
11
AX1240S-AP-0202C_R2X
Step value
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
Step value
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s
#1
1 Mbit/s
#2
100 Kbit/s
#3
64 Kbit/s